Next: TELESCOPE USER INTERFACE
Up: THE TV ACQUISITION
Previous: FUNCTIONS AVAILABLE FROM
If the TV system has been completely shutdown then check that the
following units are on.
The camera control software is now held in ROM and the only
startup/reset procedure consists of pressing the RESET button on the
Grinnell control panel.
- The large Grinnell systems unit at the base of the CAMAC rack (power
switch bottom left).
- The Westinghouse camera control unit (front switch).
- The rack immediately below (2) - power switch at the back.
Tue Aug 5 05:37:08 MET DST 1997