ADVANCED USE OF
THE PE 3210
COLD STARTUP OF
SUMMARY FOR EXPERTS
WARM RESTART (after a controlled shutdown)
D D <cr> at system terminal check that EGLE: is on as SYS. There should be three LEDs shining on front of EAGLE. If not, switch ON and DEPROTECT and wait for three LEDs to come on.
If EGLE: is OFF then type
MA EGLE:,ON,,CD=ALL It will take more than a minute to get a one-line response....then
SI[GNON] ABC,nn,DEF at the USER terminal
COLD RESTART (system off or re-initialised)
check mains supply on
check Eagle disc powered up and running
INIT the PE3210. Answer FB,F0,2,EGLE3210.LPO to prompts and await "End of Environment Configuration'.
SI ABC,nn,DEF at the user terminal
Tue Aug 5 05:37:08 MET DST 1997