next up previous contents
Next: RESTORATION OF RAW Up: THE DOME AND Previous: CONTROL OF THE

MALFUNCTION OF THE RISING FLOOR

If the rising floor does not work but power is present to other things e.g. shutters then:

  1. Check micro-switches on gate, hatches, ladder.
  2. Check all three emergency stops are fully out.
  3. Check switch and circuit breaker under the floor (follow the cables from the large motor to identify these).
  4. Check circuit breaker in basement (on the large panel of switches to the left of the Buffer Set in the plant room there is one labelled for the rising floor).



Tue Aug 5 05:37:08 MET DST 1997