PNS MANUAL: Telescope Control System
Telescope Control System
Sometimes information from the telescope (RA/Dec, etc.) does not appear
in the PN.S image headers as it should because of some kind of
communication problem with the TCS.
The following is the proper way to bring the system up to prevent this:
When ICL is configured before a PN.S run, both the spare channels SPARE1
and SPARE2 should be selected.
This can be done by selecting option 15 on the configuration menu presented
when you select manual configuration when starting ICL.
As well as the SPARE1 and SPARE2 channels, the CAGB should be selected also.
About this Document
We need your input to keep these notes up-to-date.
Please add to this document, or create new ones which can be
linked from it. Send your input by email.
Last updated 29-09-2003
Documents of this background colour
are part of a set linked from the manual