Procedure for
changing IDS focus between the 235 and 500 cameras
-
Bring the ICS and uDAS (pink and orange windows)
down completely using the
shutdownobssys command
-
Switch off the detector SDSU controller
currently in use from its power supply.
-
Swap the cables from power supply, the
2 x fibre cables (marked to where they go) and the camera shutter
cable.
-
Switch on the detector SDSU controller
at power supply.
-
Type obssys
in BOTH the DAS and CI windows at the observing console to configure
for the correct detector.
(235 = EEV10, 500 = TEK5)
These are currently options 10 / 11.
-
Type startobssys
in the DAS acquisition window first and then in the CI window.
-
Type change_ids
to change the camera config in the header data.
This file: http://www.ing.iac.es/~eng/ops/int/ids-camera_change.html ejm